TDA8920BJ/N2 - 2 x 100 W class-D power amplifier The TDA8920B isA high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 x 100 W. The device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates overA wide supply voltage range from +-12.5V to +-30V and consumesA very low quiescent current. FeaturesZero dead time switching Advanced current protection: output current limiting Smooth start-up: no pop-noise due to DC
TDA8920BTH/N2 - 2 x 100 W class-D power amplifier The TDA8920B isA high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 x 100 W. The device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates overA wide supply voltage range from +-12.5V to +-30V and consumesA very low quiescent current. FeaturesZero dead time switching Advanced current protection: output current limiting Smooth start-up: no pop-noise due to DC
TDA8922BJ/N2 - 2 x 50 W class-D power amplifier The TDA8922B isA high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 x 50 W. The device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates overA wide supply voltage range from +-12.5V to +-30V and consumesA very low quiescent current. FeaturesZero dead time switching Advanced current protection: output current limiting Smooth start-up: no pop-noise due to DC of
TDA8922BTH/N2 - 2 x 50 W class-D power amplifier The TDA8922B isA high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 x 50 W. The device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates overA wide supply voltage range from +-12.5V to +-30V and consumesA very low quiescent current. FeaturesZero dead time switching Advanced current protection: output current limiting Smooth start-up: no pop-noise due to DC of
TDA9880 - Alignment-free Multistandard Vision and Fm Sound If-pll Demodulator
TDA9880T - Alignment-free multistandard vision and FM sound IF-PLL demodulator
TDA9880T/V1 - Alignment-free Multistandard Vision and FM Sound If-pll Demodulator
TDA9880/V1 - Alignment-free Multistandard Vision and FM Sound If-pll Demodulator
TDA9881 - Alignment-free vision and FM sound IF-PLL demodulator for negative modulated TV standardsThe TDA9881 is an alignment-free multistandard (PAL and NTSC) vision and sound IF signal PLL demodulator for negative modulation, including Quasi Split Sound (QSS) or intercarrier FM processing. Features5V supply voltage Gain controlled wideband Vision Intermediate Frequency (VIF) amplifier; AC-coupled Multistandard true synchronous demodulation for negative modulated standards with active carrier regeneration: very l
TDA9881HN/V2 - Alignment-free vision and FM sound IF-PLL demodulator for negative modulated TV standardsThe TDA9881 is an alignment-free multistandard (PAL and NTSC) vision and sound IF signal PLL demodulator for negative modulation, including Quasi Split Sound (QSS) or intercarrier FM processing. Features5V supply voltage Gain controlled wideband Vision Intermediate Frequency (VIF) amplifier; AC-coupled Multistandard true synchronous demodulation for negative modulated standards with active carrier regeneration: very l
TDA9881TS/V2 - Alignment-free vision and FM sound IF-PLL demodulator for negative modulated TV standardsThe TDA9881 is an alignment-free multistandard (PAL and NTSC) vision and sound IF signal PLL demodulator for negative modulation, including Quasi Split Sound (QSS) or intercarrier FM processing. Features5V supply voltage Gain controlled wideband Vision Intermediate Frequency (VIF) amplifier; AC-coupled Multistandard true synchronous demodulation for negative modulated standards with active carrier regeneration: very l
TDA9882 - Alignment-free multistandard vision and QSS FM sound IF-PLL demodulatorThe TDA9882 is an alignment-free multistandard (PAL, SECAM and NTSC) vision and sound IF signal PLL demodulator for positive and negative modulation, including Quasi Split Sound (QSS) FM and AM sound processing. Features5V supply voltage Gain controlled wideband Vision Intermediate Frequency (VIF) amplifier; AC-coupled Multistandard true synchronous demodulation with active carrier regeneration: very linear demodulation, good intermodu
TDA9882HN/V1 - Alignment-free multistandard vision and QSS FM sound IF-PLL demodulatorThe TDA9882 is an alignment-free multistandard (PAL, SECAM and NTSC) vision and sound IF signal PLL demodulator for positive and negative modulation, including Quasi Split Sound (QSS) FM and AM sound processing. Features5V supply voltage Gain controlled wideband Vision Intermediate Frequency (VIF) amplifier; AC-coupled Multistandard true synchronous demodulation with active carrier regeneration: very linear demodulation, good intermodu
TDA9882TS/V1 - Alignment-free multistandard vision and QSS FM sound IF-PLL demodulatorThe TDA9882 is an alignment-free multistandard (PAL, SECAM and NTSC) vision and sound IF signal PLL demodulator for positive and negative modulation, including Quasi Split Sound (QSS) FM and AM sound processing. Features5V supply voltage Gain controlled wideband Vision Intermediate Frequency (VIF) amplifier; AC-coupled Multistandard true synchronous demodulation with active carrier regeneration: very linear demodulation, good intermodu
TDA9884 - I2C-bus controlled multistandard alignment-free IF-PLL for mobile receptionGeneral descriptionThe TDA9884 is an alignment-free multistandard (PAL, SECAM and NTSC) vision and sound IF signal PLL demodulator for positive and negative modulation, including sound AM and FM processing.The device is specially prepared for mobile TV applications.Features * 5V supply voltage * Gain controlled wide-band VIF amplifier, AC-coupled * Multistandard true synchronous demodulation with active carrier regeneration
TDA9884HN/V1 - I2C-bus controlled multistandard alignment-free IF-PLL for mobile receptionGeneral descriptionThe TDA9884 is an alignment-free multistandard (PAL, SECAM and NTSC) vision and sound IF signal PLL demodulator for positive and negative modulation, including sound AM and FM processing.The device is specially prepared for mobile TV applications.Features * 5V supply voltage * Gain controlled wide-band VIF amplifier, AC-coupled * Multistandard true synchronous demodulation with active carrier regeneration
TDA9884TS - I2c-bus Controlled Multistandard Alignment-free If-pll For Mobile Reception
TDA9884TS/V1 - I2C-bus controlled multistandard alignment-free IF-PLL for mobile receptionGeneral descriptionThe TDA9884 is an alignment-free multistandard (PAL, SECAM and NTSC) vision and sound IF signal PLL demodulator for positive and negative modulation, including sound AM and FM processing.The device is specially prepared for mobile TV applications.Features * 5V supply voltage * Gain controlled wide-band VIF amplifier, AC-coupled * Multistandard true synchronous demodulation with active carrier regeneration
TDA9884TS/V1/S1 - I2C-bus controlled multistandard alignment-free IF-PLL for mobile receptionGeneral descriptionThe TDA9884 is an alignment-free multistandard (PAL, SECAM and NTSC) vision and sound IF signal PLL demodulator for positive and negative modulation, including sound AM and FM processing.The device is specially prepared for mobile TV applications.Features * 5V supply voltage * Gain controlled wide-band VIF amplifier, AC-coupled * Multistandard true synchronous demodulation with active carrier regeneration
TDA9885 - I2c-bus Controlled Single and Multistandard Alignment-free If-pll Demodulators
TDA9886 - I2C-bus controlled single and multistandard alignment-free IF-PLL demodulators
TDA9887 - I2c-bus Controlled Multistandard Alignment-free If-pll Demodulator With Fm Radio
TDA9901 - Wideband Differential Digital Controlled Variable Gain Amplifier
TDA9901TS - Wideband differential digital controlled variable gain amplifier
TDA9901TS/C1 - Wideband Differential Digital Controlled Variable Gain Amplifier; Package: SOT266
TDA9910 - 12-bit, Up To 80 Msample/s, Analog-to-digital Converter (adc) Direct/ultra High If Sampling
TDA9910HW/6/C1 - 12-bit, up to 80 Msps, Analog-to-Digital Converter (ADC) direct/ultra high IF samplingTh...
TDA9910HW/8/C1 - 12-bit, up to 80 Msps, Analog-to-Digital Converter (ADC) direct/ultra high IF samplingTh...
TDA9917 - General descriptionThe TDA9917 isA differential, high-speed, 8-bit Analog-to-Digital Converter (ADC) optimized for telecommunication transmission control systems and tape drive applications.The TDA9917 offers the selection between Low-Voltage Differential Signals (LVDS) and 1.8V Complementary Metal Oxide Semiconductor (CMOS) levels interface for the clock. The output data interface is 1.8V CMOS levels. It allows to sample the signal up to 250 Msample/s. All static digital inputs (CLKSEL, CCSSEL, CE_N, OT
TDA9917HW/12/C1 - General descriptionThe TDA9917 isA differential, high-speed, 8-bit Analog-to-Digital Converter (ADC) optimized for telecommunication transmission control systems and tape drive applications.The TDA9917 offers the selection between Low-Voltage Differential Signals (LVDS) and 1.8V Complementary Metal Oxide Semiconductor (CMOS) levels interface for the clock. The output data interface is 1.8V CMOS levels. It allows to sample the signal up to 250 Msample/s. All static digital inputs (CLKSEL, CCSSEL, CE_N, OT
TDA9917HW/25/C1 - General descriptionThe TDA9917 isA differential, high-speed, 8-bit Analog-to-Digital Converter (ADC) optimized for telecommunication transmission control systems and tape drive applications.The TDA9917 offers the selection between Low-Voltage Differential Signals (LVDS) and 1.8V Complementary Metal Oxide Semiconductor (CMOS) levels interface for the clock. The output data interface is 1.8V CMOS levels. It allows to sample the signal up to 250 Msample/s. All static digital inputs (CLKSEL, CCSSEL, CE_N, OT
TDA9935 - Dual 14-bit, up to 80 Msample/s, 2x Interpolating Digital-to-Analog Converter (DAC) The TDA9935 is optimized to reduce architecture complexity and overall system cost. Thanks to its direct IF conversion capabilities. It leads dynamic performances in multi-carrier support. With an internal sampling rate up to 160 Msample/s, TDA9935 is an extremely competitive solution for WCDMA, CDMA2000 and GSM/EDGE transmitters, as well as high data rate radio services as WLL, LMDS and BWA. FeaturesDual 14-bit resolution
TDA9935HW/C1 - Dual 14-bit, up to 80 Msample/s, 2x Interpolating Digital-to-Analog Converter (DAC) The TDA9935 is optimized to reduce architecture complexity and overall system cost. Thanks to its direct IF conversion capabilities. It leads dynamic performances in multi-carrier support. With an internal sampling rate up to 160 Msample/s, TDA9935 is an extremely competitive solution for WCDMA, CDMA2000 and GSM/EDGE transmitters, as well as high data rate radio services as WLL, LMDS and BWA. FeaturesDual 14-bit resolution
TDA9965AHL/C3 - 12-bit, 5.0 V, 40 Msps analog-to-digital interface for CCD cameras The TDA9965A isA 12-bit analog-to-digital interface forA CCD camera. The device includesA CTH circuit, PGA andA low-power 12-bit ADC, together with its reference voltage regulator. The CTH hasA bandwidth circuit controlled by on-chip DACs viaA serial interface.A 10-bit digital clamp controls the ADC input clamp level. FeaturesClamp and Track/Hold (CTH) circuit with adjustable bandwidth, Programmable Gain Amplifier (PGA), 12-bit Analo
TDF8590TH - General descriptionThe TDF8590TH isA high efficiency class-D audio power amplifier with low power dissipation for application in car audio systems. The typical output power is 2 x 80 W into 4 Ohm.The TDF8590TH is available inA HSOP24 power package withA small internal heat sink. Depending on the supply voltage and load conditions,A small or even no external heat sink is required. The amplifier operates overA wide supply voltage range from +-14V to +-29V and consumesA low quiescent current.Features
TDF8590TH/N1 - General descriptionThe TDF8590TH isA high efficiency class-D audio power amplifier with low power dissipation for application in car audio systems. The typical output power is 2 x 80 W into 4 Ohm.The TDF8590TH is available inA HSOP24 power package withA small internal heat sink. Depending on the supply voltage and load conditions,A small or even no external heat sink is required. The amplifier operates overA wide supply voltage range from +-14V to +-29V and consumesA low quiescent current.Features