SENSITRON
SEMICONDUCTOR
221 West Industry Court
Deer Park, NY 11729-4681
Phone (631) 586 7600
Fax (631) 242 9798
World Wide Web - http://www.sensitron.com
e-mail address - sales@sensitron.com
SEN-5282
TECHNICAL DATA
PART NUMBER SEN-5282, REV C
High Pulse Power Mil-STD-1275 Transzorb
Application:
+28V DC systems
Allows the use of 55V high efficiency FET
Increase system reliability through eliminating avalanche FET operation
Clamping below 55V DC for both 100V and 250V pulse
High Pulse Power Capability
Protection Level:
MIL-STD-1275 Compliant; 100V Surge withstanding with 0.5-ohm source impedance
Non-Hermetic version
Rating
Condition
Minimum
Maximum
Units
Peak Pulse Power Dissipation
@ 25
0
C, 1ms
-
60
KW
Steady State Power Dissipation
@ 25
0
C - 40
Watts
T
clamping
0 Volts to V
(BR)
-
<
1x 10 8 Seconds
Operating & Storage Temp.
-
-55
+ 150
0
C
Part Number
Reverse
Stand-Off
Voltage
V
WM
(Volts)
Maximum
Reverse
Leakage @ V
WM
I
D
(
A)
Minimum
Breakdown
Voltage
@ 10 mA
V
(BR)
(Volts)
Maximum
Clamping
Voltage @ I
PP
V
c
(Volts)
Maximum
Peak Pulse
Current
I
PP
(Amps)
SEN-5282 33
25
36.7 49 120
SENSITRON
SEMICONDUCTOR
221 West Industry Court
Deer Park, NY 11729-4681
Phone (631) 586 7600
Fax (631) 242 9798
World Wide Web - http://www.sensitron.com
e-mail address - sales@sensitron.com
SEN-5282
TECHNICAL DATA
PART NUMBER SEN-5282, REV C
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users'
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
PDF 
ZIP