ChipFind - документация

Электронный компонент: CY25BAH-8F-T13

Скачать:  PDF   ZIP
Rev.1.00, Aug.20.2004, page 1 of 4
CY25BAH-8F
Nch IGBT for Strobe Flasher
REJ03G0284-0100
Rev.1.00
Aug.20.2004
Features
Small surface mount package (TSSOP-8)
V
CES
: 400 V
I
CM
: 150 A
Drive voltage : 2.5 V
Outline
1,2,3,4 : Collector
5,6 : Emitter
7 : Emitter
(for the gate drive)
8 : Gate
TSSOP-8
4
3
2
1
5
6
7
8
4
1
5
8
Note:
Pin 7 is for the gate drive only.
Note that current from the main circuit cannot flow into this section.(Please see page 3.)
Applications
Strobe flasher for cameras
Maximum Ratings
(Tc = 25C)
Parameter
Symbol
Ratings
Unit
Conditions
Collector-emitter voltage
V
CES
400
V
V
GE
= 0 V
Gate-emitter voltage
V
GES
4
V
V
CE
= 0 V
Peak gate-emitter voltage
V
GEM
6
V
V
CE
= 0 V, tw = 10 s
Collector current (Pulse)
I
CM
150
A
C
M
= 400
F
(see performance curve)
Junction temperature
Tj
40 to +150
C
Storage temperature
Tstg
40 to +150
C
CY25BAH-8F
Rev.1.00, Aug.20.2004, page 2 of 4
Electrical Characteristics
(Tch = 25C)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Test conditions
Collector-emitter breakdown voltage
V
(BR)CES
450
--
--
V
I
C
= 1 mA, V
GE
= 0 V
Collector-emitter leakage current
I
CES
--
--
10
A
V
CE
= 400 V, V
GE
= 0 V
Gate-emitter leakage current
I
GES
--
--
10
A
V
GE
=
6 V, V
CE
= 0 V
Gate-emitter threshold voltage
V
GE(th)
0.4
0.6
1.2
V
V
CE
= 10 V, I
C
= 1 mA
Collector-emitter saturation voltage
V
CE(sat)
--
3.5
7.0
V
I
C
= 150 A, V
GE
= 2.5 V
Input capacitance
Cies
--
6500
--
pF
V
CE
= 25 V, V
GE
= 10 V,
f = 1MHz
Performance Curves
0
40
80
120
160
0
6
5
2
1
4
3
C
C
M
F
R
G
= 68
P
ulse
C
ollector
C
urrent I
C
M
(
A
)
Gate-Emitter Voltage V
GE
(V)
Maximum Pulse Collector Current
(Conductive Capability in Strobe Flasher Applications)
CY25BAH-8F
Rev.1.00, Aug.20.2004, page 3 of 4
Application Example
C
M
+
4
Xe Tube
Drive Circuit
Control Signal
GE
R
G(off)
68
R
G(on)
10
V
CM
V
GG
3
2
1
5
6
7
8
V
CM
I
CP
C
M
V
GE
330 V
130 A
300
F
2.85 V
Recommended Operation
Conditions
Maximum Operation
Conditions
350 V
150 A
400
F
2.5 V
Precautions on Usage
1. IGBT has MOS structure and its gate is insulated by thin silicon oxide. So please handle carefully to protect the
device from electrostatic charge.
2. Gate drive voltage during on-period must be applied to satisfy the rating of maximum pulse collector current. And
peak reverse gate current during turn-off must become less than 25 mA. (In general, when R
G (off)
= 68, it is
satisfied.)
3. The ground of the drive signal must be connected to pin 7 only. If the emitter terminal pins 5 and 6 in which a large
currents flow are given to the device as the drive signal emitter, the device may be damaged due to large currents
since the specified gate voltage is not applied to the IGBT within the device.
4. The operation life should be endured 5,000 shots under the charge current (I
Xe
150 A : full luminescence
condition) of main capacitor (C
M
= 400
F) which can endure repeated discharge of 5,000 times. Repetition period
under full luminescence condition is over 3 seconds.
5. Total operation hours applied to the gate-emitter voltage must be within 5,000 hours.
CY25BAH-8F
Rev.1.00, Aug.20.2004, page 4 of 4
Package Dimensions
8P2J(TSSOP-8)
EIAJ Package Code
JEDEC Code
Mass (g) (reference value)
Lead Material
0.035
Cu alloy
Symbol
Dimension in Millimeters
Min
Typ
Max
A
A
1
A
2
b
D
E
e
x
y
1
y
ZD
ZE
6.4
0.2
4.4
0.1
1.2MAX
3
0.1
0.65
0.1
0.13
0.1
0.1
0.5
0.2
A
[Detail A(20/1)]
0
~
8
(1)
0.15
+0.05
- 0.01
0.25
Note 1) The dimensional figures indicate representative values unless
otherwise the tolerance is specified.
Order Code
Lead form
Standard packing
Quantity
Standard order code
Standard order
code example
Surface-mounted type
Taping
3000 Type name T +Direction (1 or 2) +3
CY25BAH-8F-T13
Note : Please confirm the specification about the shipping in detail.
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
http://www.renesas.com
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology
Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co.,
Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co.,
Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
RENESAS SALES OFFICES
2004. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .1.0