OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 12/05
Page 1 of 3
Oval Orange LED Lamp
(5 mm)
OVLHQKD8
x
High luminous intensity
x
Defined spatial radiation
x
Multiple viewing angles
x
UV-resistant epoxy
x
Precision optical performance
The
OVLHQKD8
is designed for superior performance in outdoor environments. Its radiation pattern matches red
(OVLHRKD8), blue (OVLHBKD8), and green (OVLHGKD8) devices in identical packages to create LED pixels for
full-color video screens.
Applications
x
Variable message signs
x
Indoor/outdoor advertising signage
x
Traffic and highway signs
x
Full-color video signs
Product Photo Here
Part Number
Material
Emitted Color
Intensity Typ. mcd
OVLHQKD8
AlInGaP
Orange
800
Lens Color
Orange Diffused
1 ANODE 2 CATHODE
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
RoHS
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 12/05
Page 2 of 3
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Oval Orange LED Lamp (5 mm)
OVLHQKD8
Absolute Maximum Ratings
T
A
= 25
o
C unless otherwise noted
Storage Temperature Range
-40 ~ +100 C
Operating Temperature Range
-40 ~ +95 C
Reverse Voltage
5 V
Continuous Forward Current
2
50 mA
Peak Forward Current (10% Duty Cycle, 1KHz)
200 mA
Power Dissipation
130 mW
260 C
Lead Soldering Temperature (3mm from the base of the epoxy bulb)
1
Note:
1. Solder time less than 3 seconds at temperature extreme.
2. For long-term performance, the drive currents between 10mA and 30mA are recommended. Please contact an OPTEK sales
representative for more information on recommended drive conditions.
Electrical Characteristics
T
A
= 25
o
C unless otherwise noted
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
CONDITIONS
I
v
Luminous Intensity
550
800
----
mcd
I
F
= 20 mA
V
F
Forward Voltage
----
2.3
2.6
V
I
F
= 20 mA
I
R
Reverse Current
----
----
100
A
V
R
= 5 V
D
Dominant Wavelength
612
618
625
nm
I
F
= 20 mA
2 H-H
50% Power Angle
----
110
----
deg
I
F
= 20 mA
2 V-V
----
50
----
deg
I
F
= 20 mA
Standard Bins
(I
F
= 20mA)
Lamps are sorted to luminous intensity (I
V
) and dominant wavelength (
D
) bins shown.
Orders for OVLHQKD8 may be filled with any or all bins contained as below.
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
L
u
m
i
n
o
u
s
I
n
t
e
n
s
i
t
y
(
m
c
d
)
Dominant Wavelength (nm)
11001520
T
7701100
S
550770
R
612
625
Luminous intensity is
at R bin or above.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. --
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 12/05
Page 3 of 3
Oval Orange LED Lamp (5 mm)
OVLHQKD8
Typical Electro-Optical Characteristics Curves
Far Field Pattern
50% Power Angle: H-H: 110 V-V: 50
H-H
V-V
Forward Current vs Forward Voltage
V
mA
Relative Luminous Intensity vs Forward Current
%
mA
Maximum Forward DC Current vs Ambient
Temperature
mA
C
Reverse Current vs Reverse Voltage
V
A
500
300
400
600 700
800
Relative Luminous Intensity vs Wavelength
mA
Half Power WL = 23nm
100
175
50
25
0
%
PDF 
ZIP