DESCRIPTION
The uPG2163T5N is a GaAs MMIC SPDT switch for 2.4 GHz and 5 GHz dualband wireless LAN. Low insertion
loss and dual band operations suit to dualband wireless LAN system.
FEATURES
Operating frequency
: f = 2.4 to 2.5 GHz and 4.9 to 6.0 GHz
Low insertion loss
: L
INS
= 0.4 dB TYP. @ f = 2.4 to 2.5 GHz
:
L
INS
= 0.5 dB TYP. @ f = 4.9 to 6.0 GHz
Handling power
: P
in (1 dB)
= +31 dBm TYP. @ f = 2.5 GHz
+29 dBm TYP. @ f = 6.0 GHz
High isolation
: ISL = 35 dB TYP. @ f = 2.4 to 2.5 GHz
: ISL = 30 dB TYP. @ f = 4.9 to 6.0 GHz
Input/output return loss : RL
in
/RL
out
= 15 dB TYP. @ f = 2.4 to 2.5 GHz
: RL
in
/RL
out
= 15 dB TYP. @ f = 4.9 to 6.0 GHz
6-pin plastic TSON package (1.5
1.5
0.4 mm)
APPLICATION
2.4 GHz and 5 GHz dualband wireless LAN : IEEE802.11a+b/g
ORDERING INFORMATION
Part Number
Package
Marking
Supplying Form
uPG2163T5N-E2 6pinTSON
TBD
Embossed tape 8 mm wide
Pin 1.6 face to tape perforation side
Qty TBD kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: uPG2163T5N
PRELIMINARY PRODUCT INFORMATION
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices
representative for availability and additional information.
GaAs MMIC SPDT SWITCH FOR 2.4 GHz AND 5 GHz DUALBAND WIRELESS LAN
GaAs INTEGRATED CIRCUIT
uPG2163T5N
Document No. 1
st
version
Date Published May 2005 CP(K)
Printed in Japan
NEC Compound Semiconductor Devices 2005
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No.
Pin Name
1 NC
(GND)
2 Vcont2
3 RX
4 TX
5 Vcont1
6 ANT
Top View Bottom View
EXPOSED PAD
GND
Remark NC is functionally non-connection pin but actually grounding is recommended.
TRUTH TABLE
V
cont1
V
cont2
ANT-RX
ANT-TX
High Low ON OFF
Low High OFF ON
ABSOLUTE MAXIMUM RATINGS (T
A
= +25
C, unless otherwise specified)
Parameter Symbol
Ratings Unit
Switch Control Voltage
V
cont
-
6.0 to +6.0
Note 1
V
Input Power
P
in
TBD dBm
Operating Ambient Temperature
T
A
-
45 to +85
C
Storage Temperature
T
stg
-
55 to +150
C
Notes 1.
|
V
cont1
-
V
cont2
|
6.0 V
PRELIMINARY PRODUCT INFORMATION
2
uPG2163T5N
RECOMMENDED OPERATING RANGE (T
A
= +25
C)
Parameter Symbol
MIN.
TYP.
MAX.
Unit
Operating Frequency 1
f1
2.4
-
2.5 GHz
Operating Frequency 2
f2
4.9
-
6.0 GHz
Switch Control Voltage (H)
V
cont (H)
2.7 3.0 5.0 V
Switch Control Voltage (L)
V
cont (L)
-
0.2 0 0.2 V
ELECTRICAL CHARACTERISTICS (T
A
= +25
C, V
cont
= 3.0 V/0 V, Z
O
= 50
, DC blocking capacitors
value: 4 pF, Each port, unless otherwise specified)
Parameter Symbol
Test
Conditions MIN.
TYP.
MAX.
Unit
f = 2.4 to 2.5 GHz
-
0.4 TBD dB
Insertion Loss
Lins
f = 4.9 to 6.0 GHz
-
0.5 TBD dB
f = 2.4 to 2.5 GHz
TBD
35
-
dB
Isolation
ISL
f = 4.9 to 6.0 GHz
TBD
30
-
dB
f = 2.4 to 2.5 GHz
-
15
-
dB
Input Return Loss
RLin
f = 4.9 to 6.0 GHz
-
15
-
dB
f = 2.4 to 2.5 GHz
15
-
dB
Output Return Loss
RLout
f = 4.9 to 6.0 GHz
-
15
-
dB
P
in (1 dB)
f = 2.5 GHz
-
31
-
dBm
1 dB Gain Compression
Input Power
f = 6.0 GHz
-
29
-
dBm
Switch Control Speed
t
SW
-
50
-
ns
Control Current
Icont
RF Non
-
0.7 1.5
A
PRELIMINARY PRODUCT INFORMATION
3
uPG2163T5N
EVALUATION CIRCUIT
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
4
F
4
F
4
F
1000
F
1000
F
PRELIMINARY PRODUCT INFORMATION
4
uPG2163T5N
PACKAGE DIMENSIONS
6-PIN PLASTIC TSON (UNIT: mm)
Bottom View
Side View
0.7
Preliminary
0.2
PRELIMINARY PRODUCT INFORMATION
5
uPG2163T5N
M8E 00. 4 - 0110
The information in this document is current as of March, 2004. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special":
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.
and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
PRELIMINARY PRODUCT INFORMATION
6
uPG2163T5N
Caution
GaAs
Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
Do not burn, destroy, cut, crush, or chemically dissolve the product.
Do not lick the product or in any way allow it to enter the mouth.
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general)
Hong Kong Head Office
Taipei Branch Office
Korea Branch Office
TEL: +852-3107-7303
TEL: +886-2-8712-0478
TEL: +82-2-558-2120
FAX: +852-3107-7309
FAX: +886-2-2545-3859
FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH http://www.ee.nec.de/
TEL: +49-211-6503-0 FAX: +49-211-6503-1327
California Eastern Laboratories, Inc. http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
0401
NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/
E-mail: salesinfo@ml.ncsd.necel.com (sales and general)
techinfo@ml.ncsd.necel.com (technical)
5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579
For further information, please contact
uPG2163T5N
PDF 
ZIP