MITSUMI
Bluetooth
TM
USB Adaptor
WML-C52APR
Class 2
OUTLINE
This is a USB adaptor that complies with
BluetoothTM Ver. 1.1.
It provides excellent cost performance because
the Bluetooth higher protocol stack is installed
on Windows.
Telecommunication component
FEATURES
1. Complies with Bluetooth Ver. 1.1.
2. Complies with FCC Part15.247, ETS300 328, ETS301 489 and EN60950.
3. Ultra-small size makes it ideal for mobile use.
4. Cableless structure.
5. USB bus power eliminates need for external power supply.
6. Realizes outstanding interconnectivity.
7. Supports voice applications such as headsets with SCO link via HCI.
8. Standard HCI/USB IF enables support of other higher stacks.
*
Bluetooth
TM
is a registered trademark of Ericsson.
MITSUMI
SPECIFICATIONS
Bluetooth
TM
USB Adaptor
Item
Specifications
Frequency
2400~2483.5MHz
Modem system
FHSS/GFSK 1Mbps 1600hop/s
Data transmission speed
723.2k/57.6kbps(asymmetrical,max.)
433.9kbps(symmetrical,max.)
Transmission power
0dBm(Bluetooth TX power class 2)
Reception sensitivity
-80dBm typ.
Reach distance
0.5m~10m(Varies depending on use environment)
Interface
USB Rev1.1, Bluetooth 1.1, Conforms to HCI/USB
Protocol
Bluetooth host controller, L2CAP, SDP, RFCOMM
Generic access, Service discovery application
Profile
Serial port, LAN access, Dial-up networking
FAX,Object push, File transfer, Synchronization
Headset, PAN, Hardcopy Cable Replacement
Operating environment
Windows98SE,Windows ME,Windows2000,WindowsXP
Power supply
USB bus powered mode
Current consumption
80mA typ.
DIMENSIONS
Unit : mm
Japan Etching satin finished No2G
0.2 POLISH
12
4.5
12.2
48
20.4
41.75
2.5
2
-
(0.67)
2.7
36.5
20.4
0.5
30
7
7.8
19.4
13.6
R5.75
4-
R 1.5
R20
2-
R 1
2-
R 2
2-
R 1
R 1.5
R 1.5
R1.5
R10
R 1.5
R1.5
R1.5
R1.5
R1.5
R10
R1
R10
0.25
1
4
2-R 0.5
TERMINALS
1. VBUS
2. D-
3. D+
4. GND
SHELL SHIELD
*
For the technical details of the products in this page, please refer to High frequency, communication sales promotion Dept., (Tochigi Mitsumi charge) Sales Div. Phone: 042-310-5374.
PDF 
ZIP