15-21SURW/S530-A2/TR8
PACKAGE IN 8mm TAPE ON 7" DIAMETER
REEL.
COMPATIBLE WITH AUTOMATIC PLACE-
MENT EQUIPMENT.
COMPATIBLE WITH INFRARED AND VAP-
OR PHASE REFLOW SOLDER PROCESS.
MONO-COLOR TYPE.
The 15-21 SMD Taping is much smaller than le-
aded components, thus enable smaller board size,
higher packing density, reduced storage space and
finally smaller equipment to be obtained.
Besides, light Weight makes them ideal for minia-
ture application, etc.
Automotive: backlighting in dashboard and switch.
Telecommuncation: indicator and backlighting in telephone and fax.
Flat backlight for LCD, switch and symbol.
General use.
CHIP
Material
Emitted Color
!"
AlGaInP
Hyper Red
White Diffused
#$$
"
%
&!'
())*
#+%,-.+ +(,/,0+"(, .+"*+"1,+#
..-+.- .
..-.22+.-.+.-. .
1113()4
"43,5,355,54,
!,3
Lens Color
PART NO
15-21SURW/S530-A2/TR8
.
!&
,
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause
big current change ( Burn out will happen ).
2. Storage time
2.1 The operation of temperature and R.H. are : 5
~35, R.H.60%.
2.2 Once the package is opened , the products should be used within a week.
Otherwise , they should be keep in a dampproof box with desiccants.
Considering the tape life , we suggest our customers to use our products
within a year(from production date).
2.3 If opened more than one week in an atmosphere 5
~35, R.H.60%
+
they should be treated at 60
5for 15hrs.
2.4 When you discover that the desiccant in the package has a pink color
(normal=blue) , you should treat them in the same conditions as 2.3.
%
15-21SURW/S530-A2/TR8
-
-
'.)/
Please refer to the following figure :
-
)
Basic spec is
5 sec when 260.If temperature is higher, time should be shorter (+10
-1sec). Power dissipation of iron should be smaller than 15 W , and temperature should
be controllable.Surface temperature of the device should be under 230
.
0
1. Customer must finish rework within 5 sec under 260
.
2. Copper foil can not be touched by the head of iron.
3. Twin-head type is preferred.