CPCI-563
16 Channel SPST Relay Output Board
for the CompactPCI
Bus
FEATURES
16 Form A (SPST-Normally Open) relays
500 mA current rating
500V isolation
3 modes of operation:
- 16 independant relays
- 1 of 16 single ended MUX with programmable break
before make delay (2/4/8/16 mS)
- 2 of 8 differential MUX with programmable break
before make delay (2/4/8/16 mS)
Programmable delay for Break before Make
Windows
ActiveX control
The CPCI-563 is a cost effective 16 channel SPST Form A
relay board for use with CompactPCI chassis. All input/output
connections are made through a front panel 37 pin "D"
connector. The board can be used with various applications
including as control switching, analog multiplexing, alarm
control, lighting control, and as motor starter control.
The 16 electromechanical reed relays can be addresed in
three configurations; 16 independent relays (from any to all
relays on), 1 of 16 multiplexer, 2 of 8 multiplexer. Four
programmable break before make time delay options are
available when in either multiplexed modes.
The CPCI-563 also includes connections to the chassis' +5 VDC
power supply with the addition of a field replaceable fuse.
Figure 1. Functional Block Diagram
DATEL, Inc., Mansfield, MA 02048 (USA)
Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356
Email: sales@datel.com
Internet: www.datel.com
PRODUCT DATA
Programmable
Logic
CPCI BUS
PCI
Controller
Front Panel
Activity Indicator
(Yellow LED Lamp)
K0
K8
K1
K9
K2
K10
K3
K11
K4
K12
K5
K13
K6
K14
K7
K15
+5 VDC @0.25A
CPCI-563
DATEL, Inc., Mansfield, MA 02048 (USA)
Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356
Email: sales@datel.com
Internet: www.datel.com
Input/Output Connector
The I/O connector for the CPCI-563 is a standard 37-pin
female type D connector and is accessible at the front of the
CPCI chassis.
Figure 2. I/O Connector
Software
Windows has become the platform of choice for many data
acquisition, test, measurement, and control applications.
These feature rich, 32-bit operating systems exploit huge
amounts of memory, secure multi-threading, and hardware
plug-n-play (PnP) to provide high performing, user friendly
working environments.
CPCI-563WIN
Each CPCI-563 includes installation software (on PC-CDROM
disk) for hardware detection and initialization under Windows
95/98 and Windows NT. The control panel provides an easy
to use, point and click graphical user interface (GUI) allowing
access to all operating modes, delay options, and reed relay
outputs.
CPCI-563WINS
The CPCI-563WINS (on PC-CDROMS disk)
includes all the
features of the CPCI-563WIN software plus the complete source
code to the GUI application (Microsoft Visual Basic) and DLLs
(Visual C++), and allows you to communicate with the CPCI-563
from the familiar environment of your favorite high level
language - C/C++, Visual Basic, Delphi, LabVIEW
, etc. Its
standard Windows ActiveX control facilitates custom software
development of the CPCI-563 into other applications. The
source code also contains some simple example programs in
Visual Basic, Visual C++, Quick C, and National Instruments'
LabVIEW.
Relays
Quantity
16 dry reeds*, hermetically
sealed
Contact Rating
10 Watts @ 0.5A or 200 VDC
maximum
Contact Material
Silver-Palladium
Contact Resistance
<100 m
maximum
Contact Arrangement
Form A
Switching Time
<1.0 mS typical
Life Rating
100 x 10
7
operations minimum
Vibration
10 to 55 Hz; 5 mm (0.2 in)
double amplitude
Isolation
500 VDC
General
Front Panel Connector
37 pin D, DB-37S
PCI Controller
AMCC S5920
Outline Dimensions
CPCI 3U size, 4PH single width
100 x 160 x 20.32 mm
Operating Temp. Range
0 to +60C, non-condensing
Storage Temp. Range
25 to +85C
Altitude
0 to 10,000 feet, forced cooling
required
Power Consumption
+5V, 12V at 5W maximum
*Mercury wetted reed relays are available for special order.
ORDERING INFORMATION
CPCI-563
16 channel SPST relay output board for
the CompactPCI bus.
PC-CDROM
Windows 95/98/NT software application for
the CPCI-563. Includes a Windows
device driver and DLL. Included with
CPCI-563.
PC-CDROMS
Source code for CPCI-563WIN. Includes
the source code to the GUI application,
ActiveX (Microsoft Visual Basic) and DLL
sources (Visual C++), plus sample
programs in C/C++, Visual Basic, and
National Instruments' LabVIEW.
PC-490C
Recommended Screw Terminal Adapter
PC-8503A-3
Recommended flat cable 37 pin, male to
female (3 ft.).
37
36
35
34
33
32
31
30
29
28
27
26
25
K0 (C)
K1 (C)
K2 (C)
K3 (C)
K4 (C)
K5 (C)
K6 (C)
K7 (C)
K8 (C)
K9 (C)
K10 (C)
K11 (C)
K12 (C)
18
17
16
15
14
13
12
11
10
9
8
7
24
K13 (C)
6
23
K14 (C)
5
22
K15 (C)
4
21
GROUND
3
20
+5 VDC
2
1
K1 (NO)
K2 (NO)
K3 (NO)
K4 (NO)
K5 (NO)
K6 (NO)
K7 (NO)
K8 (NO)
K9 (NO)
K10 (NO)
K12 (NO)
K13 (NO)
K14 (NO)
K15 (NO)
No Connect
No Connect
No Connect
19 K0 (NO)
K11 (NO)
FUNCTIONAL SPECIFICATIONS
(typical at +25C unless noted)
LabVIEW is a National Instruments trademark
Windows is a Microsoft Corporation trademark
CompactPCI is a PCI Industrial Computer Manufacturers Group trademark
Rev. A 10/02
PDF 
ZIP