Du line
Fieldbus
Installationbus
Specifications are subject to change without notice (24.10.2006)
1
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Product De scrip tion
Ordering Key
Type: Dupline
Mini-E housing
Function
No. of channels
Input type
Transmitter for Digital Signals
Type G 5010 1106
Single channel transmitter
Contact input
Input pulse prolongation
Codeable LED output e.g. for feedback purposes
Supplied by Dupline
, no external supply required
Mini-E housing
Direct wall or DIN-rail mounting
Channel coding by GAP 1605
Supply Spec i fi ca tions
Power supply
Supplied by Dupline
Current consumption
with LED OFF
Typ. 450 A
with LED ON
Typ. 1.2 mA
General Spec i fi ca tions
Environment
Degree of protection
IP 20
Pollution degree
3 (IEC 60664)
Operating temperature
-20 to +50C (-4 to +122F)
Storage temperature
-50 to +85C (-58 to +185F)
Humidity (non-condensing)
20 to 80%
Mechanical re sist ance
Shock
15 G (11 ms)
Vibration
2 G (6 to 55 Hz)
Dimensions
49 x 22.5 x 56 mm (L x W x H)
Material
PC/ABS blend
Input Spec i fi ca tions
Inputs
1 contact
Open loop voltage
2.5 VDC
Short-circuit current
17 A
Operating time for signal "1"
< 1 pulse train + 10 ms
Operating time for signal "0"
< 1 pulse train + 500 ms
Contact resistance
< 1 k
Cable length
< 3 m
Dielectric voltage
Input - Dupline
None
G 5010 1106
Dupline
-powered single-
channel transmitter in Mini-E
housing with contact input.
Especially well suited in places
where no power supply is
available. On the input, there
is a built-in pulse-prolongation
which ensures that even short
input pulses are transmitted.
Upon activation of the input
a short charge current pulse
ensures that the contacts are
kept clean. On the front of the
module, there is a red LED
which can be coded for any
Dupline
channel address
for indication of channel ON
status. There are only 4 termi-
nals on the module: 2 for
Dupline
and 2 for the input.
Supply
Ordering No.
1 channel
Contact
Supplied by Dupline
G 5010 1106
Type Selection
Du line
Fieldbus
Installationbus
2
Specifications are subject to change without notice (24.10.2006)
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
G 5010 1106
Mode of Operation
Wiring Diagram
S: signal wire
Programming cable
to GAP 1605
GAP-TPH-CAB
Accessories
Dupline
-powered 1-channel
transmitter with contact input.
There is a built-in pulse-pro-
longation on the input to
ensure that even short input
pulses are transmitted. On
the front of the module there
is a red LED which can be
coded to indicate the status
of any Dupline
-channel.
The input and the LED out-
put can be coded individual-
ly by means of the code pro-
grammer GAP 1605. For
details, please refer to the
respective data sheet. Please
note that a special cable
(GAP-TPH-CAB) is required to
connect the GAP 1605 to the
programming plug behind the
front plate of G 5010 1106.
The channel address for the
input is selected under I/O-1
on the GAP 1605 and the
channel address for the LED
output under I/O-5.
S
Dimensions (mm)
Mini E-housing
55.4
22.5
56
47.4
15
49
4 x 3.4
PDF 
ZIP