High Performance...
u
Unequaled "Ability to Acquire"
u
Patented TruePrint Technology
u
Industry's best FAR/FRR
Small Form Factor...
u
100-pin LQFP package
u
14mm x 14mm x 1.4mm
Robust Packaging...
u
Scratch and impact resistant
(stress-tested to > 40,000 psi)
u
Rub-resistant to > 1M rubs
u
Impervious to contamination
Detection Matrix...
u
128 x 128 pixels
u
6.5mm x 6.5mm
u
500 ppi high-resolution images
SelectaBus...
u
Asynchronous serial interface
u
8-bit parallel interface
u
Universal Serial Bus (USB)
Operating Voltage Range...
u
2.7V - 3.6V
Commercial Temp. Range...
u
0C through +70C
Power Dissipation @ 3.3V...
u
Advanced power management
u
6 mW imaging (avg.)
u
500 W finger detection
u
60 W standby
u
200 mAH/month power switch
u
Advanced finger detection
High-Rate Image Capture...
u
Up to 32 frames/second
ESD Resistance...
u
IEC 61000-4-2 Level 3 (8KV)
Supported Operating Systems...
u
Microsoft
Windows 98
, ME
,
2000
, XP
, and , NT
v4.0
u
Symbian
, CE 3.0
EntrPad
AES3500
Fingerprint Sensor
Introducing
...
The all-new EntrPad AES3500 is
AuthenTec's low-power, small-sized
touch fingerprint identification
sensor. The EntrPad AES3500
uses industry standard 0.35u
CMOS technology. This product
combines silicon-based image
capture with proprietary sensor
control and matching algorithms.
AuthenTec's EntrPad utilizes
TruePrint
technology allowing the
sensor to look past the easily
obscured outer surface of the skin
to the living layer below where the
unique ridge and valley patterns of
the fingerprint originate.
AuthenTec sensors are the first and
only fingerprint-based biometric
authentication solutions that can
work for everyone, everywhere,
under the most demanding real-
world conditions.
TruePrint Is...
AuthenTec's unique, patented
imaging technology. During
imaging, a small signal is generated
between the IC and the finger's live
layer. The pixels in the sensor
matrix form a planar antenna array
that receives this signal, creating a
digital pattern that accurately
reproduces the fingerprint's
underlying structure.
A powerful component of TruePrint
is Dynamic Optimization. This tool
analyzes each frame, controlling up
to 15 parameters to optimize the
fingerprint image, regardless of
unusual skin conditions or surface
contamination.
Superior Image Quality...
The result is a high-quality image
that makes possible the most
reliable authentication. These
images ensure that we can capture
everyone, every time under virtually
all conditions.
Target Applications...
The EntrPad AES3500 is
optimized for use in Personal
Electronic Devices including mobile
PCs, PDAs, cell phones, wireless
products, and internet appliances.
Convenient Security...
The EntrPad AES3500 is the first
fingerprint sensor specifically
designed for the demands of the
wireless hand-held market. Its
extremely small size and low power
requirements make it ideal for secure
and convenient access to such
equipment. The on-chip finger
detection capability allows the
AES3500 to act as a power switch
and eliminates system overhead for
finger detection.
Building On Success...
The AES3500 is AuthenTec's third
fingerprint sensor and the second
product in the EntrPad family.
The AES3500 continues to take
advantage of AuthenTec's field
proven TruePrint Technology to
provide the best Ability to Enroll and
Ability to Acquire in the industry.
P. O. Box 2719
Melbourne, FL
32902-2719 U.S.A.
321-308-1300 (phone)
321-308-1430 (fax)
www.authentec.com
info@authentec.com
Copyright 2003 AuthenTec, Inc. All rights reserved. AuthenTec, FingerLoc, EntrPad, AF-S2, AFS8500, AES4000, AES3500, AES3400,
TruePrint, the phrase "Personal Security for the Real World," and the AuthenTec colophons and logotypes are trademarks of AuthenTec, Inc.
Microsoft and Windows are registered trademarks of Microsoft Corp. All other trademarks and registered trademarks are the property of the
respective holders. All specifications are subject to change without notice and do not represent a commitment on the part of AuthenTec, Inc.
No part of this publication may be reproduced in any form or by any means without prior written permission. Printed in the United States of
America. AuthenTec is a leading semiconductor company providing advanced biometric fingerprint sensors to the PC, wireless, PDA,
access control and automotive markets.
2232-22-042103
The EntrPad AES3500 sensor incorporates
flexible SelectaBus architecture. This feature
allows the developer to deploy designs that use
not only the popular Universal Serial Bus, but
also asynchronous serial interfaces and an 8-bit
parallel interface implementation.
u
USB Low Power Version 2.0 low + full speed
u
Bus choice is pin-selectable
u
Advanced biometric power management system
u
High data throughput rates
With SelectaBus, several solutions can be served
by a single SKU, simplifying procurement and
inventory management.
AES3500 EntrPad by AuthenTec, Inc.
The form factor of the
EntrPad
AES3500 is
100-pin JEDEC-standard
Low-profile Quad Flat Package (LQFP)
Fingerprint
Sensor
Array
(128 pixels x 128 pixels)
Dynamic
Optimization
Control
Sensor
Control
Power Management
D
a
t
a
C
o
n
t
r
o
l
VID/PID
Bus
CTRL
I/O
Async
Serial
Interfaces
Parallel
Interface
USB
Interface
In addition to AuthenTec's latest sensor,
let us introduce you to the AuthenTec
family of kits...
AuthenTec provides a full range of hardware,
software, and support for easy integration. This
includes advanced sensor control and fingerprint
matching algorithms, device driver support for
Windows 98, 2000, and NT v4.0, ME and XP
and support for industry-standard biometric
Applications Programming Interfaces (APIs). All
these features are conveniently bundled into
kits:
u
Technology Evaluation Kits (TEKs)
are low cost introductory tools that come
complete with a sensor module, matching
algorithms, and demonstration software. TEKs
enable quick and easy investigation of our
technology.
u
Software Developer's Kits (SDKs)
are available for Independent Software Vendors
(ISVs) who wish to develop products that
interface with AuthenTec sensors.
u
Reference Design Kits (RDKs)
enable manufacturers of PCs, peripherals,
PDA's, and wireless devices to quickly integrate
AuthenTec sensors into their products.
u
"OS Ready" Operating System Support
enables AuthenTec to provide dedicated
software drivers in support of unique customer
hardware platforms in a relatively short time.
Our current list of supported "OS-Ready"
operating systems include Symbian, Windows
CE3.0 and Palm OS. Contact AuthenTec
directly for more information regarding this
support.
For more information contact AuthenTec or
your local AuthenTec representative.
14mm
14mm
7.2mm
7.2mm
1.
1.4mm body thickness
PDF 
ZIP