AD5373 - 32-Channel, 14-Bit, Serial Input, Voltage-Output D/A ConverterThe AD5373 contains 32, 14-bit DACs inA single, 56-lead LFCSP or 64-lead LQFP package. The AD5373 provides buffered voltage outputs withA span 4 times the reference voltage (Vref). The user can trim the gain and offset of each DAC inpendently via on-chip m and c registers – enabling system calibration. For even greater flexibility, the device is divided into two groups of DACs with 8 and 24 channels respectively. Every group hasA separate offs
AD5378 - 32-Channel 14-Bit Serial/Parallel Bipolar D/A ConverterThe AD5378 isA 32-channel 14-bit bipolar voltage-output DAC. It combines 32 DAC channels and 32 output amplifiers (with gain) inA single package. All DACs are monotonic to 14-bits and accurate to 12-bits. The maximum output voltage span of the DACs is 17.5 V. The output range is determined by the reference values e.g. an output range of -8.75V to +8.75V can be derived using reference voltages of -3.5V (Vref-) and +5V (Vref+). Users can digitally a
AD5378ABC - 32-Channel 14-Bit Serial/Parallel Bipolar D/A ConverterThe AD5378 isA 32-channel 14-bit bipolar voltage-output DAC. It combines 32 DAC channels and 32 output amplifiers (with gain) inA single package. All DACs are monotonic to 14-bits and accurate to 12-bits. The maximum output voltage span of the DACs is 17.5 V. The output range is determined by the reference values e.g. an output range of -8.75V to +8.75V can be derived using reference voltages of -3.5V (Vref-) and +5V (Vref+). Users can digitally a
AD5378ABCZ - 32-Channel 14-Bit Serial/Parallel Bipolar D/A ConverterThe AD5378 isA 32-channel 14-bit bipolar voltage-output DAC. It combines 32 DAC channels and 32 output amplifiers (with gain) inA single package. All DACs are monotonic to 14-bits and accurate to 12-bits. The maximum output voltage span of the DACs is 17.5 V. The output range is determined by the reference values e.g. an output range of -8.75V to +8.75V can be derived using reference voltages of -3.5V (Vref-) and +5V (Vref+). Users can digitally a
AD5379 - 40-channel, 14-bit, Parallel and Serial Input, Bipolar Voltage-output Dac
AD5379ABC - 40-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage-Output DAC
AD5392BST-5 - 8-/16-Channel, 3 V/5 V, Serial Input, Single- Supply, 12-/14-Bit Voltage Output DACs
AD5392BST-5-REEL - 8-/16-Channel, 3 V/5 V, Serial Input, Single- Supply, 12-/14-Bit Voltage Output DACs
AD5398 - 120 mA, Current Sinking, 10-Bit, I2C D/A ConverterThe AD5398 isA single 10-bit DAC with 120 mA output current sink capability. It features an internal reference and operates fromA single 2.7V to 5.5V supply. The DAC is controlled viaA 2-wire (I2C compatible) serial interface that operates at clock rates up to 400 kHz. The AD5398 incorporatesA power-on reset circuit, which ensures that the DAC output powers-up to zero and remains there untilA valid write takes place. It also hasA power-down feature t
AD5398BCPZ-REEL - 120 mA, Current Sinking, 10-Bit, I2C D/A ConverterThe AD5398 isA single 10-bit DAC with 120 mA output current sink capability. It features an internal reference and operates fromA single 2.7V to 5.5V supply. The DAC is controlled viaA 2-wire (I2C compatible) serial interface that operates at clock rates up to 400 kHz. The AD5398 incorporatesA power-on reset circuit, which ensures that the DAC output powers-up to zero and remains there untilA valid write takes place. It also hasA power-down feature t
AD5398BCPZ-REEL7 - 120 mA, Current Sinking, 10-Bit, I2C D/A ConverterThe AD5398 isA single 10-bit DAC with 120 mA output current sink capability. It features an internal reference and operates fromA single 2.7V to 5.5V supply. The DAC is controlled viaA 2-wire (I2C compatible) serial interface that operates at clock rates up to 400 kHz. The AD5398 incorporatesA power-on reset circuit, which ensures that the DAC output powers-up to zero and remains there untilA valid write takes place. It also hasA power-down feature t
AD5398BCPZ-WP - 120 mA, Current Sinking, 10-Bit, I2C D/A ConverterThe AD5398 isA single 10-bit DAC with 120 mA output current sink capability. It features an internal reference and operates fromA single 2.7V to 5.5V supply. The DAC is controlled viaA 2-wire (I2C compatible) serial interface that operates at clock rates up to 400 kHz. The AD5398 incorporatesA power-on reset circuit, which ensures that the DAC output powers-up to zero and remains there untilA valid write takes place. It also hasA power-down feature t
AD5399 - Twos Complement, Dual 12-bit Dac With Internal Ref and Fast Settling Time
AD5399YRM - Twos Complement, Dual 12-Bit DAC with Internal REF and Fast Settling Time
AD5399YRM-REEL7 - Twos Complement, Dual 12-Bit DAC with Internal REF and Fast Settling Time
AD539J - Wideband Dual-Channel Linear Multiplier/Divider
AD539JChip - Wideband Dual-Channel Linear Multiplier/Divider
AD539JD - Wideband Dual-Channel Linear Multiplier/Divider
AD539JN - Wideband Dual-Channel Linear Multiplier/Divider
AD539K - Wideband Dual-Channel Linear Multiplier/Divider
AD539KD - Wideband Dual-Channel Linear Multiplier/Divider
AD539KN - Wideband Dual-Channel Linear Multiplier/Divider
AD539S - Wideband Dual-Channel Linear Multiplier/Divider
AD539SD - Wideband Dual-Channel Linear Multiplier/Divider
AD539SE - Wideband Dual-Channel Linear Multiplier/Divider
AD5405 - Dual 12-bit, High Bandwidth, Multiplying Dac With 4-quadrant Resistors and Parallel Interface
AD5405YCP - Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface
AD5405YCP-REEL - Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface
AD5405YCP-REEL7 - Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface
AD5415 - Dual 12-bit, High Bandwidth, Multiplying Dac With 4-quadrant Resistors and Serial Interface
AD5415 - Dual 8-,10-,12-bit High Bandwidth Multiplying Dacs With Serial Interface
AD5415YRU - Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Serial Interface
AD5415YRU-REEL - Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Serial Interface
AD5415YRU-REEL7 - Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Serial Interface
AD542 - High Performance, Bifet Operational Amplifiers
AD5424 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5424 - 8-/10-/12-bit, High Bandwidth, Multiplying Dacs With Parallel Interface
AD5425 - 8-bit, High Bandwidth Multiplying Dac With Serial Interface
AD5425YRM - 8-Bit, High Bandwidth Multiplying DAC with Serial Interface
AD5425YRM-REEL - 8-Bit, High Bandwidth Multiplying DAC with Serial Interface
AD5425YRM-REEL7 - 8-Bit, High Bandwidth Multiplying DAC with Serial Interface
AD5426 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5426 - 8-/10-/12-bit High Bandwidth Multiplying Dacs With Serial Interface
AD5426BRM - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5426YRM - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5426YRM-REEL - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5426YRM-REEL7 - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5428 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5428YRU - Dual 8-Bit, High Bandwidth Multiplying DACs with Parallel InterfaceThe AD5428/AD5440/AD5447 are Dual CMOS 8-, 10- and 12-Bit Current Output Digital-to-Analog Converters (DACs) respectively. These devices operate fromA +2.5V to 5.5V power supply, making them suited to battery powered applications and many other applications. These DACs utilize Data readback, allowing the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeros and
AD5428YRU-REEL - Dual 8-Bit, High Bandwidth Multiplying DACs with Parallel InterfaceThe AD5428/AD5440/AD5447 are Dual CMOS 8-, 10- and 12-Bit Current Output Digital-to-Analog Converters (DACs) respectively. These devices operate fromA +2.5V to 5.5V power supply, making them suited to battery powered applications and many other applications. These DACs utilize Data readback, allowing the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeros and
AD5428YRU-REEL7 - Dual 8-Bit, High Bandwidth Multiplying DACs with Parallel InterfaceThe AD5428/AD5440/AD5447 are Dual CMOS 8-, 10- and 12-Bit Current Output Digital-to-Analog Converters (DACs) respectively. These devices operate fromA +2.5V to 5.5V power supply, making them suited to battery powered applications and many other applications. These DACs utilize Data readback, allowing the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeros and
AD5429 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5429YRU - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5429YRU-REEL - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5429YRU-REEL7 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD542SH - High Performance, BiFET Operational Amplifiers
AD542SH/883B - High Performance, BiFET Operational Amplifiers
AD5432 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5432 - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5432BRM - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5432YRM - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5432YRM-REEL - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5432YRM-REEL7 - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5433 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5433 - 8-/10-/12-Bit, High Bandwidth, Multiplying DACs with Parallel Interface
AD5439 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5439YRU - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5439YRU-REEL - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5439YRU-REEL7 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD544 - High Performance, BiFET Operational Amplifiers
AD5440 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5440YRU - Dual 10-Bit, High Bandwidth Multiplying DACs with Parallel InterfaceThe AD5428/AD5440/AD5447 are Dual CMOS 8-, 10- and 12-Bit Current Output Digital-to-Analog Converters (DACs) respectively. These devices operate fromA +2.5V to 5.5V power supply, making them suited to battery powered applications and many other applications. These DACs utilize Data readback, allowing the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeros and
AD5440YRU-REEL - Dual 10-Bit, High Bandwidth Multiplying DACs with Parallel InterfaceThe AD5428/AD5440/AD5447 are Dual CMOS 8-, 10- and 12-Bit Current Output Digital-to-Analog Converters (DACs) respectively. These devices operate fromA +2.5V to 5.5V power supply, making them suited to battery powered applications and many other applications. These DACs utilize Data readback, allowing the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeros and
AD5440YRU-REEL7 - Dual 10-Bit, High Bandwidth Multiplying DACs with Parallel InterfaceThe AD5428/AD5440/AD5447 are Dual CMOS 8-, 10- and 12-Bit Current Output Digital-to-Analog Converters (DACs) respectively. These devices operate fromA +2.5V to 5.5V power supply, making them suited to battery powered applications and many other applications. These DACs utilize Data readback, allowing the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeros and
AD5443 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5443BRM - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5443YRM - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5443YRM-REEL - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5443YRM-REEL7 - 8-/10-/12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5444 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5445 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5445 - 8-/10-/12-Bit, High Bandwidth, Multiplying DACs with Parallel Interface
AD5446 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5447 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5447YRU - Dual 12-Bit, High Bandwidth Multiplying DACs with Parallel InterfaceThe AD5428/AD5440/AD5447 are Dual CMOS 8-, 10- and 12-Bit Current Output Digital-to-Analog Converters (DACs) respectively. These devices operate fromA +2.5V to 5.5V power supply, making them suited to battery powered applications and many other applications. These DACs utilize Data readback, allowing the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeros and
AD5447YRU-REEL - Dual 12-Bit, High Bandwidth Multiplying DACs with Parallel InterfaceThe AD5428/AD5440/AD5447 are Dual CMOS 8-, 10- and 12-Bit Current Output Digital-to-Analog Converters (DACs) respectively. These devices operate fromA +2.5V to 5.5V power supply, making them suited to battery powered applications and many other applications. These DACs utilize Data readback, allowing the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeros and
AD5447YRU-REEL7 - Dual 12-Bit, High Bandwidth Multiplying DACs with Parallel InterfaceThe AD5428/AD5440/AD5447 are Dual CMOS 8-, 10- and 12-Bit Current Output Digital-to-Analog Converters (DACs) respectively. These devices operate fromA +2.5V to 5.5V power supply, making them suited to battery powered applications and many other applications. These DACs utilize Data readback, allowing the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with zeros and
AD5449 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5449YRU - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5449YRU-REEL - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5449YRU-REEL7 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD544SH - High Performance, BiFET Operational Amplifiers
AD544SH/883B - High Performance, BiFET Operational Amplifiers
AD5450 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5450 - 8/10/12/14-bit High Bandwidth Multiplying Dacs With Serial Interface
AD5450YUJ - 8/10/12/14-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5450YUJ-REEL - 8-Bit High Bandwidth Multiplying DACs With Serial Interface.the AD5450 isA CMOS 8...
AD5450YUJ-REEL7 - 8-Bit High Bandwidth Multiplying DACs With Serial Interface.the AD5450 isA CMOS 8...
AD5450YUJZ-REEL1 - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD5450YUJZ-REEL71 - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD5451 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5451 - 8/10/12/14-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5451YUJ - 8/10/12/14-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5451YUJ-REEL - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD5451YUJ-REEL7 - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD5451YUJZ-REEL1 - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD5451YUJZ-REEL71 - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD5452 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5452 - 8/10/12/14-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5452YRM - 8/10/12/14-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5452YRM-REEL - The AD5452 isA CMOS 12-bit Current Output Digital-to-analog Converter. This Device Oper...
AD5452YRM-REEL7 - The AD5452 isA CMOS 12-bit Current Output Digital-to-analog Converter. This Device Oper...
AD5452YUJ - 8/10/12/14-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5452YUJ-REEL - The AD5452 isA CMOS 12-bit Current Output Digital-to-analog Converter. This Device Oper...
AD5452YUJ-REEL7 - The AD5452 isA CMOS 12-bit Current Output Digital-to-analog Converter. This Device Oper...
AD5452YUJ-U1 - The AD5452 isA CMOS 12-bit Current Output Digital-to-analog Converter. This Device Oper...
AD5452YUJZ-REEL1 - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD5452YUJZ-REEL71 - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD5453 - Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5453 - 8/10/12/14-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5453YRM - 8/10/12/14-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5453YRM-REEL - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD5453YRM-REEL7 - 14-Bit High Bandwidth Multiplying DACs With Serial Interface.the AD5453 isA CMOS...
AD5453YUJ - 8/10/12/14-Bit High Bandwidth Multiplying DACs with Serial Interface
AD5453YUJ-REEL - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD5453YUJ-REEL7 - 8-/10-/12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface The AD5450/AD5451/AD5452/AD54531 are CMOS 8-/10-/ 12-/14-bit current output digital-to-analog converters, respectively. These devices operate fromA 2.5V to 5.5V power supply, making them suited to several applications, including battery-powered applications.
AD545A - Monolithic Precision, Low Drift Fet-input Op Amp
AD545AJ - Monolithic Precision, Low Drift FET-Input Op Amp
AD545AK - Monolithic Precision, Low Drift FET-Input Op Amp
AD545AL - Monolithic Precision, Low Drift FET-Input Op Amp
AD545AM - Monolithic Precision, Low Drift FET-Input Op Amp
AD546 - 1 Pa Monolithic Electrometer Operational Amplifier
AD546J - 1 pA Monolithic Electrometer Operational Amplifier
AD546JN - 1 pA Monolithic Electrometer Operational Amplifier
AD546K - 1 pA Monolithic Electrometer Operational Amplifier
AD546KN - 1 pA Monolithic Electrometer Operational Amplifier
AD547 - High Performance, BiFET Operational Amplifiers
AD547JH - High Performance, BiFET Operational Amplifiers
AD547KH - High Performance, BiFET Operational Amplifiers
AD547LH - High Performance, BiFET Operational Amplifiers
AD547SCHIPS - High Performance, BiFET Operational Amplifiers
AD549J - Ultralow Input Bias Current Operational Amplifier
AD549JChips - Ultralow Input Bias Current Operational Amplifier
AD549JH - Ultralow Input Bias Current Operational Amplifier
AD549K - Ultralow Input Bias Current Operational Amplifier
AD549KH - Ultralow Input Bias Current Operational Amplifier
AD549L - Ultralow Input Bias Current Operational Amplifier
AD549LH - Ultralow Input Bias Current Operational Amplifier
AD549S - Ultralow Input Bias Current Operational Amplifier
AD549SH - Ultralow Input Bias Current Operational Amplifier
AD549SH/883B - Ultralow Input Bias Current Operational Amplifier
AD5516 - 16-channel, 12-bit Voltage-output Dac With 14-bit Increment Mode
AD5516-1 - 16-Channel, 12-Bit Voltage-Output DAC with 14-Bit Increment Mode
AD5516-2 - 16-Channel, 12-Bit Voltage-Output DAC with 14-Bit Increment Mode
AD5516-3 - 16-Channel, 12-Bit Voltage-Output DAC with 14-Bit Increment Mode
AD5516ABC-1 - 16-Channel, 12-Bit Voltage-Output DAC with 14-Bit Increment Mode
AD5516ABC-2 - 16-Channel, 12-Bit Voltage-Output DAC with 14-Bit Increment Mode
AD5516ABC-3 - 16-Channel, 12-Bit Voltage-Output DAC with 14-Bit Increment Mode
AD5520 - Per Pin Parametric Measurement Unit/source Measure Unit
AD5520JST - Per Pin Parametric Measurement Unit/Source Measure Unit
AD5520JST-REEL - Per Pin Parametric Measurement Unit/Source Measure Unit
AD5530 - Serial Input, Voltage Output 12-/14-bit Dacs
AD5530BRU - Serial Input, Voltage Output 12-/14-Bit DACs
AD5530BRU-REEL - Serial Input, Voltage Output 12-/14-Bit DACsThe AD5530 and AD5531 are single 12-, 14-bit serial input, voltage output DACs, respectively.They utilizeA versatile 3-wire interface that is compatible with SPI®, QSPI™, MICROWIRE™, and DSP interface standards. Data is presented to the part in the format ofA 16-bit serial word. Serial data is available on the SDO pin for daisy-chaining purposes. Data readback allows the user to read the contents of the DAC register via the SDO pin.
AD5530BRU-REEL7 - Serial Input, Voltage Output 12-/14-Bit DACsThe AD5530 and AD5531 are single 12-, 14-bit serial input, voltage output DACs, respectively.They utilizeA versatile 3-wire interface that is compatible with SPI®, QSPI™, MICROWIRE™, and DSP interface standards. Data is presented to the part in the format ofA 16-bit serial word. Serial data is available on the SDO pin for daisy-chaining purposes. Data readback allows the user to read the contents of the DAC register via the SDO pin.
AD5530BRUZ1 - Serial Input, Voltage Output 12-/14-Bit DACsThe AD5530 and AD5531 are single 12-, 14-bit serial input, voltage output DACs, respectively.They utilizeA versatile 3-wire interface that is compatible with SPI®, QSPI™, MICROWIRE™, and DSP interface standards. Data is presented to the part in the format ofA 16-bit serial word. Serial data is available on the SDO pin for daisy-chaining purposes. Data readback allows the user to read the contents of the DAC register via the SDO pin.
AD5531 - Serial Input, Voltage Output 12-/14-Bit DACs
AD5531BRU - Serial Input, Voltage Output 12-/14-Bit DACs
AD5531BRU-REEL - Serial Input, Voltage Output 12-/14-Bit DACsThe AD5530 and AD5531 are single 12-, 14-bit serial input, voltage output DACs, respectively.They utilizeA versatile 3-wire interface that is compatible with SPI®, QSPI™, MICROWIRE™, and DSP interface standards. Data is presented to the part in the format ofA 16-bit serial word. Serial data is available on the SDO pin for daisy-chaining purposes. Data readback allows the user to read the contents of the DAC register via the SDO pin.
AD5531BRU-REEL7 - Serial Input, Voltage Output 12-/14-Bit DACsThe AD5530 and AD5531 are single 12-, 14-bit serial input, voltage output DACs, respectively.They utilizeA versatile 3-wire interface that is compatible with SPI®, QSPI™, MICROWIRE™, and DSP interface standards. Data is presented to the part in the format ofA 16-bit serial word. Serial data is available on the SDO pin for daisy-chaining purposes. Data readback allows the user to read the contents of the DAC register via the SDO pin.
AD5531BRUZ1 - Serial Input, Voltage Output 12-/14-Bit DACsThe AD5530 and AD5531 are single 12-, 14-bit serial input, voltage output DACs, respectively.They utilizeA versatile 3-wire interface that is compatible with SPI®, QSPI™, MICROWIRE™, and DSP interface standards. Data is presented to the part in the format ofA 16-bit serial word. Serial data is available on the SDO pin for daisy-chaining purposes. Data readback allows the user to read the contents of the DAC register via the SDO pin.
AD5531s - Serial Input, Voltage Output, 14-Bit DAC
AD5535 - 32-channel, 14-bit Dac With Full-scale Output Voltage Programmable From 50V To 200 V
AD5535ABC - 32-Channel, 14-Bit DAC with Full-Scale Output Voltage Programmable from 50V to 200 V
AD5535ABCZ - 32-Channel, 14-Bit DAC with Fullscale Output Voltage Programmable from 50V to 200 VThe AD5535 isA 32-channel 14-bit DAC with an on-chip high voltage output amplifier. This device is targeted for optical microelectromechanical systems. The output voltage range is programmable via the REFIN pin. Output range is 0 to 50V with REFIN=1V and is 0V to +200V with REFIN=4 V. Each amplifier can source 700 µA, ideal for the deflection and control of optical MEMS mirrors. The output amplifier withA gain of 50 is
AD5539 - Ultrahigh Frequency Operational Amplifier
AD5624 - 2.7V to 5.5 V, 450 µA, Rail-to-Rail Output, Quad, 12-/16-Bit nanoDACs®The AD5624/AD5664, members of the nanoDAC family, are low power, quad, 12-, 16-bit buffered voltage-out DACs that operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design.The AD5624/AD5664 require an external reference voltage to set the output range of the DAC. The part incorporatesA power-on reset circuit that ensures the DAC output powers up to 0V and remains there untilA valid write takes place. The parts
AD5624BCPZ-250RL7 - 2.7V to 5.5 V, 450 µA, Rail-to-Rail Output, Quad, 12-/16-Bit nanoDACs®The AD5624/AD5664, members of the nanoDAC family, are low power, quad, 12-, 16-bit buffered voltage-out DACs that operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design.The AD5624/AD5664 require an external reference voltage to set the output range of the DAC. The part incorporatesA power-on reset circuit that ensures the DAC output powers up to 0V and remains there untilA valid write takes place. The parts
AD5624BCPZ-REEL7 - 2.7V to 5.5 V, 450 µA, Rail-to-Rail Output, Quad, 12-/16-Bit nanoDACs®The AD5624/AD5664, members of the nanoDAC family, are low power, quad, 12-, 16-bit buffered voltage-out DACs that operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design.The AD5624/AD5664 require an external reference voltage to set the output range of the DAC. The part incorporatesA power-on reset circuit that ensures the DAC output powers up to 0V and remains there untilA valid write takes place. The parts
AD5624BRMZ - 2.7V to 5.5 V, 450 µA, Rail-to-Rail Output, Quad, 12-/16-Bit nanoDACs®The AD5624/AD5664, members of the nanoDAC family, are low power, quad, 12-, 16-bit buffered voltage-out DACs that operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design.The AD5624/AD5664 require an external reference voltage to set the output range of the DAC. The part incorporatesA power-on reset circuit that ensures the DAC output powers up to 0V and remains there untilA valid write takes place. The parts
AD5624BRMZ-REEL7 - 2.7V to 5.5 V, 450 µA, Rail-to-Rail Output, Quad, 12-/16-Bit nanoDACs®The AD5624/AD5664, members of the nanoDAC family, are low power, quad, 12-, 16-bit buffered voltage-out DACs that operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design.The AD5624/AD5664 require an external reference voltage to set the output range of the DAC. The part incorporatesA power-on reset circuit that ensures the DAC output powers up to 0V and remains there untilA valid write takes place. The parts
AD5624R - Quad,12-Bit nanoDAC™ with 5ppm/°C On-Chip Reference in MSOPThe AD5624R/AD5644R/AD5664R, members of the nanoDAC family, are low power, quad, 16-bit buffered voltage-out DAC that operates fromA single 2.7V to 5.5V supply and is guaranteed monotonic by design. The AD5624R/AD5644R/AD5664R have an on-chip reference with an internal gain of two. The AD56x4-3 hasA 1.25V 5ppm/°C max reference and the AD56x4-5 haveA 2.5V 5ppm/°C reference. The on-board reference is off at power-up allowing the use of an externa
AD5628 - Octal, 12-Bit D/A Converter with 10ppm/°C Max On-Chip Reference in 14-Lead TSSOPThe AD5628/AD5648/AD5668 family of devices are low power, octal, 12- 14-16-bit buffered voltage-out DACs. All devices operate fromA single +2.7V to +5.5V, and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of two. The AD56x8-1 hasA 1.25V 10ppm/°C max reference and the AD56x8-2,-3 haveA 2.5V 10ppm/°C max reference. The on-board reference is off at power-up allowing
AD5628ARUZ-2 - Octal, 12-Bit D/A Converter with 10ppm/°C Max On-Chip Reference in 14-Lead TSSOPThe AD5628/AD5648/AD5668 family of devices are low power, octal, 12- 14-16-bit buffered voltage-out DACs. All devices operate fromA single +2.7V to +5.5V, and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of two. The AD56x8-1 hasA 1.25V 10ppm/°C max reference and the AD56x8-2,-3 haveA 2.5V 10ppm/°C max reference. The on-board reference is off at power-up allowing
AD5628ARUZ-2REEL7 - Octal, 12-Bit D/A Converter with 5 ppm/°C On-Chip Reference in 14-Lead TSSOP AD5628/AD5648/AD5668 devices are low power, octal, 12-/14-/16-bit, buffered voltage-output DACs. All devices operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of 2. The AD5628/AD5648/AD5668-1 haveA 1.25V 5 ppm/°C reference, givingA full-scale output range of 2.5 V; the AD5628/AD5648/AD5668-2, -3 haveA 2.5V 5 ppm/°C refere
AD5628BRUZ-1 - Octal, 12-Bit D/A Converter with 10ppm/°C Max On-Chip Reference in 14-Lead TSSOPThe AD5628/AD5648/AD5668 family of devices are low power, octal, 12- 14-16-bit buffered voltage-out DACs. All devices operate fromA single +2.7V to +5.5V, and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of two. The AD56x8-1 hasA 1.25V 10ppm/°C max reference and the AD56x8-2,-3 haveA 2.5V 10ppm/°C max reference. The on-board reference is off at power-up allowing
AD5628BRUZ-1REEL7 - Octal, 12-Bit D/A Converter with 5 ppm/°C On-Chip Reference in 14-Lead TSSOP AD5628/AD5648/AD5668 devices are low power, octal, 12-/14-/16-bit, buffered voltage-output DACs. All devices operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of 2. The AD5628/AD5648/AD5668-1 haveA 1.25V 5 ppm/°C reference, givingA full-scale output range of 2.5 V; the AD5628/AD5648/AD5668-2, -3 haveA 2.5V 5 ppm/°C refere
AD5628BRUZ-2 - Octal, 12-Bit D/A Converter with 10ppm/°C Max On-Chip Reference in 14-Lead TSSOPThe AD5628/AD5648/AD5668 family of devices are low power, octal, 12- 14-16-bit buffered voltage-out DACs. All devices operate fromA single +2.7V to +5.5V, and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of two. The AD56x8-1 hasA 1.25V 10ppm/°C max reference and the AD56x8-2,-3 haveA 2.5V 10ppm/°C max reference. The on-board reference is off at power-up allowing
AD5628BRUZ-2REEL7 - Octal, 12-Bit D/A Converter with 5 ppm/°C On-Chip Reference in 14-Lead TSSOP AD5628/AD5648/AD5668 devices are low power, octal, 12-/14-/16-bit, buffered voltage-output DACs. All devices operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of 2. The AD5628/AD5648/AD5668-1 haveA 1.25V 5 ppm/°C reference, givingA full-scale output range of 2.5 V; the AD5628/AD5648/AD5668-2, -3 haveA 2.5V 5 ppm/°C refere
AD5640 - Single, 12-/14-/16-Bit nanoDAC with 5 ppm/C On-Chip Reference in SOT-23
AD5640ARJ-2500RL7 - 3 V/5 V, 14-Bit nanoDAC™ Converter with 5 ppm/°C On-Chip Reference in Sot-23The AD5640,A member of the nanoDAC family of devices, isA low power, single, 14-bit buffered voltage-out DAC, guaranteed monotonic by design with an integrated on chip max 5 ppm/°C reference. The AD5640 operates either fromA 3V single supply featuring an internal reference of 1.25V and an internal gain of two orA 5V single supply featuring an internal reference of 2.5V also with an internal gain of two. The reference is guar
AD5640ARJ-2REEL7 - 3 V/5 V, 14-Bit nanoDAC™ Converter with 5 ppm/°C On-Chip Reference in Sot-23The AD5640,A member of the nanoDAC family of devices, isA low power, single, 14-bit buffered voltage-out DAC, guaranteed monotonic by design with an integrated on chip max 5 ppm/°C reference. The AD5640 operates either fromA 3V single supply featuring an internal reference of 1.25V and an internal gain of two orA 5V single supply featuring an internal reference of 2.5V also with an internal gain of two. The reference is guar
AD5640BRJ-1500RL7 - 3 V/5 V, 14-Bit nanoDAC™ Converter with 5 ppm/°C On-Chip Reference in Sot-23The AD5640,A member of the nanoDAC family of devices, isA low power, single, 14-bit buffered voltage-out DAC, guaranteed monotonic by design with an integrated on chip max 5 ppm/°C reference. The AD5640 operates either fromA 3V single supply featuring an internal reference of 1.25V and an internal gain of two orA 5V single supply featuring an internal reference of 2.5V also with an internal gain of two. The reference is guar
AD5640BRJ-1REEL7 - 3 V/5 V, 14-Bit nanoDAC™ Converter with 5 ppm/°C On-Chip Reference in Sot-23The AD5640,A member of the nanoDAC family of devices, isA low power, single, 14-bit buffered voltage-out DAC, guaranteed monotonic by design with an integrated on chip max 5 ppm/°C reference. The AD5640 operates either fromA 3V single supply featuring an internal reference of 1.25V and an internal gain of two orA 5V single supply featuring an internal reference of 2.5V also with an internal gain of two. The reference is guar
AD5640BRJ-2500RL7 - 3 V/5 V, 14-Bit nanoDAC™ Converter with 5 ppm/°C On-Chip Reference in Sot-23The AD5640,A member of the nanoDAC family of devices, isA low power, single, 14-bit buffered voltage-out DAC, guaranteed monotonic by design with an integrated on chip max 5 ppm/°C reference. The AD5640 operates either fromA 3V single supply featuring an internal reference of 1.25V and an internal gain of two orA 5V single supply featuring an internal reference of 2.5V also with an internal gain of two. The reference is guar
AD5640BRJ-2REEL7 - 3 V/5 V, 14-Bit nanoDAC™ Converter with 5 ppm/°C On-Chip Reference in Sot-23The AD5640,A member of the nanoDAC family of devices, isA low power, single, 14-bit buffered voltage-out DAC, guaranteed monotonic by design with an integrated on chip max 5 ppm/°C reference. The AD5640 operates either fromA 3V single supply featuring an internal reference of 1.25V and an internal gain of two orA 5V single supply featuring an internal reference of 2.5V also with an internal gain of two. The reference is guar
AD5640CRM-1 - 3 V/5 V, 14-Bit nanoDAC™ Converter with 5 ppm/°C On-Chip Reference in Sot-23The AD5640,A member of the nanoDAC family of devices, isA low power, single, 14-bit buffered voltage-out DAC, guaranteed monotonic by design with an integrated on chip max 5 ppm/°C reference. The AD5640 operates either fromA 3V single supply featuring an internal reference of 1.25V and an internal gain of two orA 5V single supply featuring an internal reference of 2.5V also with an internal gain of two. The reference is guar
AD5640CRM-1REEL7 - 3 V/5 V, 14-Bit nanoDAC™ Converter with 5 ppm/°C On-Chip Reference in Sot-23The AD5640,A member of the nanoDAC family of devices, isA low power, single, 14-bit buffered voltage-out DAC, guaranteed monotonic by design with an integrated on chip max 5 ppm/°C reference. The AD5640 operates either fromA 3V single supply featuring an internal reference of 1.25V and an internal gain of two orA 5V single supply featuring an internal reference of 2.5V also with an internal gain of two. The reference is guar
AD5640CRM-2 - 3 V/5 V, 14-Bit nanoDAC™ Converter with 5 ppm/°C On-Chip Reference in Sot-23The AD5640,A member of the nanoDAC family of devices, isA low power, single, 14-bit buffered voltage-out DAC, guaranteed monotonic by design with an integrated on chip max 5 ppm/°C reference. The AD5640 operates either fromA 3V single supply featuring an internal reference of 1.25V and an internal gain of two orA 5V single supply featuring an internal reference of 2.5V also with an internal gain of two. The reference is guar
AD5640CRM-2REEL7 - 3 V/5 V, 14-Bit nanoDAC™ Converter with 5 ppm/°C On-Chip Reference in Sot-23The AD5640,A member of the nanoDAC family of devices, isA low power, single, 14-bit buffered voltage-out DAC, guaranteed monotonic by design with an integrated on chip max 5 ppm/°C reference. The AD5640 operates either fromA 3V single supply featuring an internal reference of 1.25V and an internal gain of two orA 5V single supply featuring an internal reference of 2.5V also with an internal gain of two. The reference is guar
AD5644R - Quad, 14-Bit nanoDAC™ with 5ppm/°C On-Chip Reference in MSOPThe AD5624R/AD5644R/AD5664R, members of the nanoDAC family, are low power, quad, 16-bit buffered voltage-out DAC that operates fromA single 2.7V to 5.5V supply and is guaranteed monotonic by design. The AD5624R/AD5644R/AD5664R have an on-chip reference with an internal gain of two. The AD56x4-3 hasA 1.25V 5ppm/°C max reference and the AD56x4-5 haveA 2.5V 5ppm/°C reference. The on-board reference is off at power-up allowing the use of an extern
AD5648 - Octal, 14-Bit D/A Converter with 10ppm/°C Max On-Chip Reference in 14-Lead TSSOPThe AD5628/AD5648/AD5668 family of devices are low power, octal, 12- 14-16-bit buffered voltage-out DACs. All devices operate fromA single +2.7V to +5.5V, and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of two. The AD56x8-1 hasA 1.25V 10ppm/°C max reference and the AD56x8-2,-3 haveA 2.5V 10ppm/°C max reference. The on-board reference is off at power-up allowing
AD5648 - Octal, 14-Bit D/A Converter with 5 ppm/°C On-Chip Reference in 14-Lead TSSOPAD5628/AD5648/AD5668 devices are low power, octal, 12-/14-/16-bit, buffered voltage-output DACs. All devices operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of 2. The AD5628/AD5648/AD5668-1 haveA 1.25V 5 ppm/°C reference, givingA full-scale output range of 2.5 V; the AD5628/AD5648/AD5668-2, -3 haveA 2.5V 5 ppm/°C referen
AD5648ARUZ-2 - Octal, 14-Bit D/A Converter with 10ppm/°C Max On-Chip Reference in 14-Lead TSSOPThe AD5628/AD5648/AD5668 family of devices are low power, octal, 12- 14-16-bit buffered voltage-out DACs. All devices operate fromA single +2.7V to +5.5V, and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of two. The AD56x8-1 hasA 1.25V 10ppm/°C max reference and the AD56x8-2,-3 haveA 2.5V 10ppm/°C max reference. The on-board reference is off at power-up allowing
AD5648ARUZ-2 - Octal, 14-Bit D/A Converter with 5 ppm/°C On-Chip Reference in 14-Lead TSSOPAD5628/AD5648/AD5668 devices are low power, octal, 12-/14-/16-bit, buffered voltage-output DACs. All devices operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of 2. The AD5628/AD5648/AD5668-1 haveA 1.25V 5 ppm/°C reference, givingA full-scale output range of 2.5 V; the AD5628/AD5648/AD5668-2, -3 haveA 2.5V 5 ppm/°C referen
AD5648ARUZ-2REEL7 - Octal, 14-Bit D/A Converter with 5 ppm/°C On-Chip Reference in 14-Lead TSSOPAD5628/AD5648/AD5668 devices are low power, octal, 12-/14-/16-bit, buffered voltage-output DACs. All devices operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of 2. The AD5628/AD5648/AD5668-1 haveA 1.25V 5 ppm/°C reference, givingA full-scale output range of 2.5 V; the AD5628/AD5648/AD5668-2, -3 haveA 2.5V 5 ppm/°C referen
AD5648BRUZ-1 - Octal, 14-Bit D/A Converter with 10ppm/°C Max On-Chip Reference in 14-Lead TSSOPThe AD5628/AD5648/AD5668 family of devices are low power, octal, 12- 14-16-bit buffered voltage-out DACs. All devices operate fromA single +2.7V to +5.5V, and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of two. The AD56x8-1 hasA 1.25V 10ppm/°C max reference and the AD56x8-2,-3 haveA 2.5V 10ppm/°C max reference. The on-board reference is off at power-up allowing
AD5648BRUZ-1 - Octal, 14-Bit D/A Converter with 5 ppm/°C On-Chip Reference in 14-Lead TSSOPAD5628/AD5648/AD5668 devices are low power, octal, 12-/14-/16-bit, buffered voltage-output DACs. All devices operate fromA single 2.7V to 5.5V supply and are guaranteed monotonic by design. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of 2. The AD5628/AD5648/AD5668-1 haveA 1.25V 5 ppm/°C reference, givingA full-scale output range of 2.5 V; the AD5628/AD5648/AD5668-2, -3 haveA 2.5V 5 ppm/°C referen